CLASSIC BLAST MACHINE 1FT³ | MODEL 1042

Clemco Classic Blast Machine Model 1042 LP Complete Package is a Low Pressure Breathing Air System*, Portable, 1 cuft - 100lbs. with 1/2 inch Piping.

The 1 cuft classic blast machine holds 1 cubic foot (approximately 100 lbs.) of abrasive blast media. This small, one-man portable blast machine has ½” piping and comes with a Manual Sand valve (MSV) and remote control system. This high-performance and versatile low pressure blast machine package is an economic way to remove contamination, corrosion, mill scale, and coatings from most surfaces. If using a No. 1 (1/4-inch) blast nozzle, you can expect approximately 15 minutes of productive blasting at 80 psi.

Weight:

205.00 LBS

Manual Sand Valve

The MSV can be used to meter expendable, mineral slag abrasives and is not recommended for use with fine-mesh or glass.

Remote Controls

Included with this blast pot is the TLR-50 remote control system. This pressure-release style control system provides the operator start/stop control at the nozzle and allows the blast machine to depressurize for refilling when the control handle is released.

Package Details

*The included low pressure (LP) package provides everything necessary to begin blasting with an ambient air pump (to be used with the included LP respirator).

This cost-effective package includes

• TLR-50 remote controls (includes 10565 RLX handle)
• MSV ½” abrasive metering valve
• 25ft x ½” ID blast hose, coupled
• CHE-1/2 aluminum nozzle holder (included in 01268)
• CQA-1/2 aluminum quick coupling (included in 01268)
• Blast hose safety cable
• ½” air filter w/ manual drain
• CT-4 blast nozzle (Default)
• Blast machine screen
• Nylon tie (8 included)
• Apollo 20 LP DLX helmet w/ constant flow connector
• 25ft respirator hose
• 1 pair leather gloves
• Apollo 20 outer lens (25 pk)
• Quick coupling gaskets (10 pk)
• Nozzle washers (10 pk)
• 3 outer valve diaphragms